Suzy B Software 2

home *** CD-ROM | disk | FTP | other *** search

/ Suzy B Software 2 / Suzy B Software CD-ROM 2 (1994).iso / bootup / boot_n2z / runr150k / menu_bar.hlp < prev next >

Wrap

Text File | 1995-05-02 | 26KB | 492 lines

Runner -- A Desktop Alternative GEM MENU BAR Files / Menus / Colors Copyright (C) 1991 by Dave Thorson Version 1.50 March 10, 1991 Runner lets you use the traditional GEM menu bar for the most common commands. Notice that when you move the mouse into the menu bar, the arrow turns into a pointing hand. While the hand is visible, you cannot select anything EXCEPT what's in the GEM menus. Press the left mouse button (outside of any pull-down menus and below the menu bar) to change the hand back to an arrow. $$ Desk --------------------------------------------------------------- Desk File Menus Colors --------------------------------------------------------------- | About.... | | Use Accessories | ------------------ Desk - About.... Under Desk you will find About... Click on it to see my name, Runner's version number, and the approximate amount of free RAM (Runner uses lots of stuff internally that gets cleared before a program is run, and there's no good way to tell exactly how much space will be available to the program -- this estimate may be off by several thousand bytes). Desk - Use accessories Click on Use Accessories to get to any of the shaded desk accessories in the Desk menu. The screen will clear and a single Desk menu will appear. Accessories can be freely used now, although many of them leave behind "holes" in the screen (depending on your color choices). Under the Desk menu, the second item is now called End Accessories. Click on this to quit using accessories and get back to the Runner program. $$ File --------------------------------------------------------------- Desk File Menus Colors --------------------------------------------------------------- | Load config | | Save config | | Background | | Installed Apps | |----------------| | Fix (rerun) | ---------------- The File menu contains Load, Save, Installed Apps, Background and Fix options. Note that Quit is not available here as it is in most File menus. Exit Runner is available from the top level Runner menu or by pressing the Undo key. $$ File - Load config Load lets you load RUNNER.CFG. It opens a file selector showing Runner's home directory, but you can change to another directory or load a different configuration file. There is no warning to save any changes you may have made to the configuration already in memory, so be careful. Loading a new .CFG file will replace anything already in memory except the picture. Clicking on Cancel in the file selector box will stop the load operation. $$ File - Save config Save lets you preserve your current setup for the next time you run Runner. Program configurations and descriptions, menus, menu structures, initial and text color palettes and the main title are all saved in the configuration file (as well as lots of other stuff). Use the name RUNNER.CFG if you want that configuration to be auto-loaded the next time you start Runner, or give it another name if you choose. "File - Load config" lists all files in Runner's home directory that end with ".CFG", so you should use this extension (.CFG) for any configuration files you save. Clicking on Cancel in the file selector box will stop the save operation. Note: File - Save may also create a picture configuration file recording any changes in menu list position, menu space display attributes (how much of the underlying background picture is blanked out by spaces around the menu), background picture palette, and any Regions information for the picture if you have changed any of these since loading the picture. These files have the same name as the current picture in memory, but with a file extension of .CF1, .CF2 or .CF3 to match the picture's screen resolution. If you loaded MOUNTAIN.PI1, File - Save might create a MOUNTAIN.CF1 picture configuration file. If you want to force the save of a picture configuration file without updating the RUNNER.CFG file on your disk, hold down Alternate or Control when selecting the "Save config" command. Safety Feature: Both Runner configuration and picture configuration files are saved using this procedure: 1. Create ".TMP" filename (ex: MYCONFIG.CFG becomes MYCONFIG.TMP) 2. Write file to disk using ".TMP" filename 3. If successful: 3a. Delete any file matching desired save name (ex: MYCONFIG.CFG) 3b. Rename ".TMP" file to desired name (ex: MYCONFIG.CFG) If a save is NOT successful (disk full or other problems) then your original file is not changed in any way. You may want to erase any ".TMP" files Runner creates, although they won't cause any problems for Runner. There is no good way to check disk space requirements for saving a file without a lot of extra code in memory. If you try to save a file and fail, you will see Runner's main error message dialog box, giving you the choice of exiting Runner or returning to Runner. You can always select the option to return to Runner and try again to save the file to a different disk. $$ File - Installed apps This is not exactly a "file" operation but this used to be where you came to "Install Apps", and it's been left here for the convenience of long-time Runner users. Selecting this option displays a list of any installed applications. Each application is shown following the file extension that triggers it. If more than one extension is used to trigger an application, each one appears on a separate line. If there are too many lines to fit on one screen, press a key to see the next part of the list. At the end of the list, press a key to return to Runner's normal menu list display. For information on how to install applications, see the file DIALOG.HLP, which describes the Add/Change dialog box where applications are installed. $$ File - Background Background lets you load and unload pictures. If no picture is in memory, a file selector will appear showing all the .PIx and .PCx (x=1,2,3) files for the current resolution in Runner's home directory. Use the file selector box to move to another disk or directory if needed. Select the picture you want, and it will become the background for Runner's screen. If a picture is already displayed when you select Background, you will be asked if you want to load another picture or unload the one you've got. Unloading a picture frees 32,000 bytes of memory for larger applications. Loading a new picture replaces the old one and brings in the color palette for the new picture. Clicking on Cancel from the file selector box will stop the picture load operation and leave the current picture (if any) in memory. If a picture has an associated picture configuration file (.CF1, .CF2 or .CF3 extension), it will be loaded along with the picture. And, if a Runner .CFG config file is found in the same directory as the picture file, with the same name (except for the extension), it will be loaded as well. This will replace all menus in memory so be sure to save them first if needed. This feature lets you have customized menu lists for each picture. If no matching .CFG file is found, the menus in memory are not affected by loading a new background pic. As an example, if you load MOUNTAIN.PI1, Runner will also try to load MOUNTAIN.CF1 and MOUNTAIN.CFG. If a matching picture config file is not found, the default picture parameters are used. If a matching .CFG file is not found, the menus and related info in memory are left unchanged for the new picture. Note that a picture file can also contain the filename of another picture to load, instead of picture data. In this case, the filename read from this "faux picture file" is used to determine the .CFx and .CFG filenames to look for. There is one important exception to the above: if a picture file called RUNNER.PIx or RUNNER.PCx is selected, and it has the name of a picture file in it instead of picture data, and a matching .CFG file is not found, then RUNNER.CFG will be loaded from Runner's home directory. Background pictures can also be loaded by pressing a shifted number key (from the top keyboard row, not the keypad). For this to work, the picture name must be assigned to the key within the Regions program. If no picture file is assigned, the key does nothing. The same filenames can also be assigned to a screen region within the Regions program; then clicking within that region will load the appropriate picture and config files. Note that if the color registers used for the background color and the text color have color values that are too close, you may not be able to read text on the screen. You'll need to change colors. This is described in detail in KEYBOARD.HLP, but for now hold Control (or Alternate) and press G to make the background palette the current colors. Press 0 on the numeric keypad to select the background color, and press R, G or B to change the background colors. Now you should be able to see what you are doing. You'll need to change the picture's palette with a paint program to make the change permanent, or select Save from the File menu to save the changed colors in a configuration file for the picture. $$ File - Fix (re-run) This command lets you "fix" Runner when an unruly application messes it up. Fix simply reloads Runner, but this is often enough to solve most problems. For example, after running ST Writer, Runner has serious problems with clearing inverse video colors and restoring what the mouse covered. After spending hours searching for a solution (to absolutely no avail) I realized that other applications might cause different problems, and that Runner's size would grow considerably if code had to be added to handle any condition. Fix is clean and simple.... Running a program via Mini-Run should also isolate most problems from Runner. Lest you think that these problems are common, I should point out that the ONLY two problem programs I've seen are ST Writer and Word Writer (which forgets to clear its buttons from memory - they get redrawn even after exiting Word Writer). I regularly use GFA BASIC, Laser C, Degas Elite, Spectrum 512, DO-IT!, Turbo ST, Atari Planetarium, Flash, Real Time, Fontrix, and several other programs and games with no problems! The only programs I've found that do not work with Runner, other than self-booting games, are Diablo and MidiDraw from Intelligent Music (these don't seem to work any time my Atari SH-204 hard drive is running, whether or not Runner is in use). $$ Menus --------------------------------------------------------------- Desk File Menus Colors --------------------------------------------------------------- | add Program | | add Menu | | Change | | Drop | | Restore | | QuickKeys Show | ---------------- The Menus menu contains add Program, add Menu, Change, Drop, Restore and Quickkeys show. This is where you change Runner's program menus to contain the programs you use most often, and configure those programs to run the way you like them. $$ Menus - add Program This option lets you add a new program to Runner's menu lists. It places the new program in the currently displayed menu, and makes an effort to keep things in alphabetical order with submenus at the top and programs at the bottom. Add Program displays a file selector box. Select a .PRG, .APP, .TTP or .TOS file from any disk or directory, or select cancel if you decide not to add a new program after all. Note that if you already have fifteen programs or menu names in the list displayed on the screen, Add Program will do nothing. In this case you must first remove something, or move to another menu. If you have pressed the Tab key to show all items in the menu regardless of screen resolution, then you might try to press Tab to hide the ones for the wrong resolution and see if you then have room to add another item. It is possible to have more than 15 items in a menu if some of them are hidden via the resolution flags (see DIALOG.HLP for more info). You can also add non-program files to Runner's menus. They can be text files (such as Runner's .HLP files) that you want to access quickly, or they can be data files or documents with file extensions that will trigger an installed application to run and then load the file. If you select Cancel or select OK with a blank filename, no change takes place and Runner's menu list reappears. Otherwise, you will see Runner's Add/Change Dialog Box. Operation of this box is described in detail in DIALOG.HLP, but for now just change the name in the Description line to the way you want it to look in Runner's menu list and press Return or the right mouse button. All the other default values should normally be okay, and you can easily change them later. $$ Menus - add Menu Adding a menu works the same as adding a program, except that instead of a file selector you are prompted at the top of the screen for the menu name to add. Then you will see the same Add/Change dialogue box used for "add Program". The Hold Screen and Use Mini-Run options don't have any effect on Menus, but to save memory the same dialogue box is used for both menus and programs. Don't worry about it. Other options not compatible with menus are not displayed or are disabled. If you leave the Description line empty, no menu is added. See DIALOG.HLP for more information. As with programs, if you already have fifteen programs or menus displayed, Add Menu has no effect. Menus can be nested, that is, a menu list can contain menus which can, in turn, contain more menus. Simply click on Add Menu while you're inside another menu, and the new menu will be nested inside the current menu. Menus can be nested in this fashion up to maximum of fifteen levels deep, probably more than you could ever use. Since one purpose of Runner is to avoid all the folder searching that goes on from the Desktop, you may want to use as few menus as necessary. This is still easier than on the desktop since you're only dealing with program names and don't need a separate menu to group together all the .RSC, data, font files and anything else needed for a program. Folders continue to do this quite well. $$ Menus - Change Change lets you change the configuration for any program, document/data file or menu. When you click on Change, a prompt at the top of the screen tells you to select a menu or program that you want to change. Use the mouse to pick a menu item, and you will again see the Add/Change Dialog Box. Change the description or any of the other options, and press Return or the right mouse button when finished. See DIALOG.HLP for more information. When the "Select to Change" prompt is visible, clicking the left mouse button away from the programs, menus and GEM menu bar will exit the change prompt. If you select the title line for Change, you can change Runner's main title. The main title only appears on Runner's top level menu (the one you see when Runner starts). On lower level menus the name of the menu appears instead. Click on any of these title lines to change the main title. The new title is saved to disk when you save a configuration file. Add your own name or whatever you like! It's possible to change (and Drop - see the next section on Menus - Drop) programs or menus that appear only in a resolution you're not in at the time. Press the Tab key to show ALL programs and menus; a "registered" symbol ("R" inside a circle) appears in front of anything you normally can't see in the current resolution. These menus or programs can now be changed or dropped normally. Press Tab again to hide items from the wrong resolution. $$ Menus - Drop Drop lets you delete a program or menu from the display. It DOES NOT change the programs on disk. Drop is similar to Change. Click on Drop and a prompt appears telling you to select a program or menu to drop. Click on the program or menu you no longer want in the list. If you drop a menu, EVERYTHING in the menu is dropped as well -- all its programs and submenus. Remember that none of your changes are permanent until you save this new configuration back to disk with the Save command in the Files menu. The Tab key (see above section on Menus - Change) is also useful with Drop. $$ Menus - Restore When you Drop a menu or program name from a menu list, it goes into a "drop buffer" for safe keeping. Selecting Restore brings it back, and inserts it into whatever menu list you're looking at. This lets you move menus or programs around in your lists, or recall something you dropped by accident. Note that the contents of a menu that is dropped are also restored with it, so whole menus can be moved wherever you like. Also note: there is only one drop buffer; when you drop a second item it clears the old information from the drop buffer first. If an item assigned to a QuickKey is dropped, it will no longer appear on the QuickKeys list either. Restoring it will return it to the list, unless that QuickKey is reassigned to another program first. Restore also places a restored item in alphabetical order, so if any of your menus get out of order, simply drop and restore the items you wish to resequence. Alphabetical order is determined by the contents of the Description line in the Add/Change Dialog Box -before- you see it, so by changing the first few characters of a description it may get out of alphabetical order. $$ Menus - QuickKeys show/hide This option lets you display a list of QuickKeys assignments instead of the normal Runner menus. Programs in the list can be selected for running as usual, and the Change option works also. Programs Dropped from the QuickKeys list are not dropped from your normal menus, they are simply deassigned from the corresponding QuickKey. Restore is disabled in the QuickKeys list, and new QuickKeys cannot be added. Selecting this option a second time returns to the normal menu display. Holding down BOTH mouse buttons works the same as selecting this option (except in file view, where pressing BOTH buttons exits file view). To view the list of alternate QuickKeys, hold down Alternate or Control when requesting the list (either Shift will also show the alternate list, which makes some amount of sense since you need Shift with the QuickKey to run a program in the alternate list). The exit line at the top of a QuickKeys list is different: it lets you view the other set of QuickKeys. The right mouse button alone does this also (remember that in normal menu lists, the right button moves you to the top menu, similar to selecting the exit line). $$ Colors --------------------------------------------------------------- Desk File Menus Colors --------------------------------------------------------------- | desKtop | |x iNitial | | backGround | | Text | ------------- The color menu lets you select which color palette you want to use when a program runs. If no picture is loaded, palette changes affect Runner's screen as well. If a picture is loaded, a new palette is displayed only briefly, then the picture's palette is restored. This lets you use a reasonable palette for running programs while displaying a picture that uses colors too disgusting for most programs. A checkmark (represented by "x" above) appears in front of the currently selected palette, also known as the "Current Palette". If you want to use a different palette for displaying a picture, hold down the Alternate or Control key when selecting the palette. You can always restore the picture's original palette by selecting backGround, or by selecting another palette without holding down Alternate. Four palettes are available: Initial - the palette loaded from Runner's configuration file Desktop - the colors in the desktop palette before Runner was started Picture - the colors from the last picture loaded into Runner Text - the palette used for viewing files from the file selector (also loaded from Runner's config file) Runner uses the concept of the "Current Palette". The Current Palette is the set of colors Runner switches to when running a program. It is a copy of one of the other palettes listed above (you can select which one from the menu bar -- it always starts out as a copy of the Initial Palette). If no picture is loaded then the Current Palette is used for Runner's menu screen as well. If a picture IS loaded, its palette normally overrides the Current Palette while the picture is visible, but the Current Palette is still used when running programs (you normally don't want your picture's colors when running your word processor). If a palette is selected with Alternate or Control depressed, then the picture is displayed using the new Current Palette. The Current Palette in effect when you save a configuration file becomes the Initial Palette the next time that configuration file is loaded. A separate Initial Palette is maintained for each resolution. A single Text Palette is also saved in your config file and shared by all resolutions. Note that the Text palette is ALWAYS used when in File View, but you may select it for use at other times as well. Individual colors within a palette can also be changed; see KEYBOARD.HLP for more information. [end of MENU_BAR.HLP]